Speakers play doesn`t matter what the microphone hear. How do I stop it? HELP!!?

I'm using Realtek HD Audio Manager next to a onboard sound card. What happen is whenever I use the mic, it plays thru the speakers. I can't use Teamspeak because of this because of all the feedback. If I turn sour the speakers its fine, but I can't hear anything else then..... HELP!!!

Speakers play doesn`t matter what the microphone hear. How do I stop it? HELP!!?

You can control this through the control panel, I enjoy the same nouns card by the way ..



budge to the Realtek HD manager, , budge to the "Mixer" tab .. on the "record side" make sure that at hand is a "cross" on the speaker icon underneath the "front mic" choice



I suppose this should work



good luck
this sounds complicated but its not, right click on your volume button beside the clock, after click open volume control, if mic is showing tick the mute box and its fixed, if the mic is not showing click option and then properties, while playback is ticked scroll down to mic and tick, next click ok, now turn to mic and tick mute and its done, i hope you understand what i am proverb. thats all you requirement to do, I have done it plentiful times
If your computer is not working properly while you are working on it, it could be a problem near device drivers, hardware or software.

Detailed instructions at http://tinyurl.com/yk5zpr